Here we are talking about how to dry a computer keyboard that was spilled on it. Sometimes accidents happen such as spilling your computer keyboard on the floor or the ground. If you want to clean it up and make it look like new again, try these simple steps!
We all know that spills happen, whether it be from a cup of coffee or the occasional soda that falls on our desks. Sometimes spills are unavoidable, and sometimes they’re just plain funny.
To Dry a computer Keyboard that Was Spilled,
- Unplug the keyboard from the computer.
- Turn the keyboard upside down and shake it gently to remove as much liquid as possible.
- Use a can of compressed air to blow out any remaining liquid from the keyboard.
- Use a damp cloth or paper towel to clean the surface of the keyboard, being careful not to saturate the cloth or towel.
- Use a dry cloth or paper towel to dry the keyboard.
- Leave the keyboard in a well-ventilated area to air dry for at least 24 hours before plugging it back in and using it again.
Without further ado, Let’s Start and talk about how to dry a computer keyboard that was spilled on.

How To Dry A Computer Keyboard That Was Spilled On
If you accidentally spill coffee or water on your keyboard, don’t despair! There are a few simple steps you can take to dry the keyboard and keep it working properly.
If your computer keyboard has been spilled on, it’s important to act quickly to prevent damage to the keyboard. Here are the steps you should take to dry out a keyboard that has been spilled on:
- Disconnect the keyboard from your computer immediately.
- Turn the keyboard upside down and gently shake it to remove any loose liquid.
- Use a can of compressed air or a soft-bristled brush to remove any debris or remaining liquid from the keyboard. Be sure to blow or brush out any crevices or hard-to-reach areas.
- Wipe the keyboard down with a clean, dry cloth to remove any remaining liquid.
- Leave the keyboard to dry for at least 24 hours in a dry, well-ventilated area.
- Once the keyboard is dry, reconnect it to your computer and test it to make sure it’s working properly.
It is important to note that some keyboards may not be recoverable. Clean the keyboard carefully, but if it still not functioning properly you may need to replace the keyboard.
Don’t Forget to Watch This Video Guide about how you can dry a computer keyboard that was spilled.
How many keys are on a computer keyboard?
What To Do If Your Keyboard Is Wet?
If your keyboard is wet, it’s important to act quickly to prevent damage to the keyboard and the computer it’s connected to. Here are the steps you should take:
- Disconnect the keyboard from your computer immediately.
- Turn off your computer to prevent any potential damage from an electrical shock.
- Remove any excess liquid from the keyboard by turning it upside down and gently shaking it.
- Clean the keyboard by using a dry cloth or paper towel to absorb as much liquid as possible. Make sure to clean all the keys and the space between the keys.
- Use a can of compressed air or a soft-bristled brush to remove any debris or remaining liquid from the keyboard.
- Keep the keyboard in a dry, well-ventilated area, and leave it to dry for at least 24 hours before attempting to use it again.
It’s important to note that some keyboards may not be recoverable. If the keyboard is not working properly after cleaning and drying, you may need to replace it.
Keep in Mind that , you should unplug other peripheral devices that might have been affected by the liquid (mouse, speakers, etc.) and clean them as well.
How to clean a sticky laptop keyboard?
If External Keyboard is wet or Spill?
If a keyboard is wet or has been spilled on, it should be unplugged immediately and allowed to dry completely before being used again.
If liquid has entered the keyboard, it can cause damage to the internal components and potentially cause the keyboard to malfunction.
If you spill something on your keyboard, you should turn it upside down to let the liquid drain out, and then use a cloth or paper towel to absorb as much of the liquid as possible. Once the keyboard is dry, you can test it to see if it still works.
In some cases, you may need to have it repaired or replaced.
Computer Keyboard Sizes Explain?
If You spill Liquid on Laptop’s Built-In Keyboard?
If you spill liquid on your laptop’s built-in keyboard, it is important to dry the keyboard as quickly as possible. The best way to do this is to use a fan or air conditioning vent to blow air over the keyboard. This will help evaporate any liquid and speed up the drying process.
If you spill liquid on a laptop’s built-in keyboard, you will need to dry it off as quickly as possible. A keyboard covered in spilled liquid will not work correctly and may even be completely ruined. Follow these steps to quickly dry your keyboard:
- If you spill liquid on a laptop’s built-in keyboard, it’s important to act quickly to minimize the potential damage. Here are the steps you should take:
- Unplug the laptop from any power source and remove the battery (if possible) to prevent any electrical damage.
- Remove the battery if possible. This will help to speed up the drying process.
- Turn the laptop upside down and gently shake it to remove as much of the liquid as possible.
- Use a cloth or paper towel to absorb any remaining liquid on the keyboard and surrounding areas. Be sure to get in between the keys as well.
- Open the laptop as much as possible to allow air to circulate and dry out the inside of the laptop.
- Leave the laptop to dry completely. This can take several days, so be patient.
- After the laptop is completely dry, reattach the battery (if possible) and plug it back in.
- Turn on the laptop to see if it still works. If it doesn’t turn on, or if it has any other issues, it may need to be repaired or replaced.
Don’t forget to Follow These steps too:
- Place the laptop on a flat surface with the keyboard facing down.
- Cover the keyboard with a cloth and weight it down with another object, such as a book.
- Leave the laptop sit for several hours or overnight.
- Replace the cloth and re-attach the battery if necessary.
- Close the laptop and wait until the keyboard is completely dry before using it.
It’s very important that you don’t try to turn on the laptop until it’s completely dry, otherwise, it may cause damage to the internal hardware. It’s best if you can avoid using the keyboard until completely dry if possible.
You might also want to consider using an external keyboard or a USB keyboard until the built-in keyboard is dry and functional again. If the problem persists or you see any visual damage, you may want to contact the manufacturer or professional repair service for help.
Latest Article: How to Put At symbol from the keyboard?
Be Careful! Try to keep in Mind These Tips When your computer or laptop keyboard got wet or spilled.
There are a few tips that can help keep your computer keyboard safe from spills:
- If you spill something on your keyboard, turn it off and unplug it from the wall before attempting to clean it. This will prevent any accidental input into your computer.
- And if you are using a laptop don’t Forge to unplug the laptop battery too.
- Use a cloth or paper towel to dab at the spill as quickly as possible. Do not rub the liquid on the keyboard!
- If the spill is large, use a vacuum cleaner with a hose attachment to suck up as much of the liquid as possible. Be sure to use caution when using this technique; avoid direct contact with power cords or other moving parts.
- If you can’t get the liquid off of the keyboard, try spraying some rubbing alcohol on a cloth and wiping down the surface.
How to Dry my Computer Keyboard? Ultimate Guide?
Drying a computer keyboard can be a bit of a challenge, but there are a few simple methods that can help get the job done.
1. Remove Liquid:
The first step is to remove any liquids or debris that may be on the keyboard. Wipe down any areas that seem particularly wet or moist with a cloth or paper towel. Make sure to remove any excess water, as this will only make the task of drying more difficult.
2. Keep it on Air Flow Area:
If possible, place the keyboard in an area with moderate airflow. This will help to speed up the drying process. Be patient it may take several hours for the keyboard to completely dry. If you find that it’s not drying quickly enough, you can use a fan to help circulate air around it.
3. Check Dampness Before Reinstalling:
When the keyboard is dry, you can reinstall the keys and cables if necessary. Be sure to check for any dampness or moisture inside the computer case before closing it up again – if there is still some moisture present, you may need to wait until the next day to try and use your computer again.
If you spilled water on it?
If you’ve spilled water on your keyboard, here’s how to dry it off:
- Remove any excess liquid by blotting with a paper towel or cloth.
- Place the keyboard on a flat, clean surface. Make sure all keys are closed and in their normal positions.
- Leave the keyboard to air-dry for 12 hours or overnight.
- After the keyboard has dried completely, apply a light coat of furniture polish to keep it looking new!
There are other methods that may be more appropriate depending on the type of keyboard and the liquids or debris that have been spilled on it.
Our New article that you can Read: How to make Heart on the keyboard?
If I spilled Coffee on Keyboard of computer?
Coffee is a sticky liquid, it might leave a residue behind, in that case, it might be best to use a specialized cleaning solution for electronic devices to clean the keyboard.
It’s very important that you don’t try to turn on the computer or use the keyboard until it’s completely dry, otherwise, it may cause damage to the internal hardware. It’s best if you can avoid using the keyboard until completely dry if possible.
If you spilled coffee on your keyboard, there are a few things you can do to try and clean it up.
- The most important thing is to remove as much of the coffee as possible before trying to dry it off.
- Carefully shake the keyboard upside down to remove as much of the coffee as possible.
- Use a cloth or paper towel to absorb any remaining coffee on the keyboard and surrounding areas. Be sure to get in between the keys as well.
- Clean the keyboard with a damp cloth and mild soap if needed. You can also use a can of compressed air to blow out any debris and dry the keyboard.
- If the coffee has already dried on the keyboard, you may need to use a air cleaner or dryer to remove it.
- After the keyboard is completely dry, plug the computer back in and turn it on to see if it still works. If it doesn’t turn on, or if the keyboard has any other issues, it may need to be repaired or replaced.
If the problem persists or you see any visual damage, you may want to contact the manufacturer or professional repair service for help.
If I spilled beer on Keyboard of computer?
If you spilled beer on the keyboard of your computer, it is important to act quickly to minimize the damage. Here are some steps you should take:
- Disconnect the keyboard from your computer. If it is a wired keyboard, unplug it from the USB or PS/2 port. If it is a wireless keyboard, remove the batteries.
- Gently tilt the keyboard upside down to allow any liquid that is still inside to drain out.
- Use a clean, dry cloth or paper towels to blot up any remaining liquid on the keyboard. Be sure to get between the keys as well.
- Let the keyboard dry completely before reconnecting it to your computer. This may take a few hours, or even a day or two, depending on the amount of liquid that was spilled and the humidity in the room. Avoid using a hair dryer or other heat source to speed up the drying process, as this can damage the keyboard.
- After keyboard is dry, you can try using it but if it does not work properly it is better to get a new one as it could have been damaged by the liquid and may not be repairable.
Please note, Beer contain sugar and other ingredients that may cause stickiness and corrosion when in contact with electronics. It is not recommended to use it again even if it turns on.
Conclusion:
In conclusion, when a computer keyboard is spilled on, it is important to act quickly in order to minimize the damage.
The first step is to disconnect the keyboard from the computer and tilt it upside down to allow any liquid to drain out. Use a clean, dry cloth or paper towels to blot up any remaining liquid, and be sure to get between the keys as well.
Once the keyboard is clean, it is important to let it dry completely before reconnecting it to the computer. This process may take a few hours, or even a day or two, depending on the amount of liquid that was spilled and the humidity in the room.
How to fix mechanical keyboard double typing?
FAQs:
How do I dry a computer keyboard that was spilled on?
To dry a computer keyboard that was spilled on, first make sure the keyboard is completely covered with a clean cloth or paper towel. Then place the keyboard in an airtight container.
You can also use a low heat setting on your stove or an oven. Just be sure to keep an eye on the keyboard so it doesn’t get too hot.
I spilled a drink on my laptop, how do I clean it?
First,, make sure all of the liquid has been removed. Next, use a cloth or paper towel to absorb any remaining liquid. Blot the surface of the laptop with a cloth or paper towel until the liquid is gone. Finally, use a vacuum cleaner with the hose attachment to carefully remove any debris
I need to clean my macbook keyboard but don't know how?
First, remove the battery and unplug the computer. Next, use a vacuum cleaner with a hose attachment to carefully remove any debris. Finally, clean the keyboard with a damp cloth.
Can I use a hair dryer to dry a wet keyboard?
It’s not recommended to use a hair dryer to dry a wet keyboard. The heat from the hair dryer can damage the keyboard’s internal components. It’s best to let the keyboard air dry in a well-ventilated area.
Can I turn on my computer while my keyboard is wet?
No, it’s not recommended to turn on your computer while the keyboard is wet. You should unplug the keyboard and let it dry before using it again to avoid any damage to your computer or keyboard.
Can I use rubbing alcohol to clean a wet keyboard?
You can use rubbing alcohol to clean a wet keyboard, but make sure to use it in moderation. You don’t want to saturate the keyboard with alcohol, and be sure to let the keyboard air dry thoroughly before using it again.
What can I do if my keyboard still doesn't work after it's dry?
If your keyboard doesn’t work after it’s dry, you may need to replace it. In some cases, liquid damage can cause irreversible damage to the keyboard’s internal components.

I am Rai Saleem (MSc. Computer Science). Worked with Different Tech StartUps. I have 4+ Years of Working Experience in the Computer Industry. On This platform, I share My Experience and Providing Solutions for Computer problems.
I Started This Journey From 2G internet with 30KB downloading Speed to This modern 5G World. Now Sharing My IT Experience With loving People Like You. I am addicted to This Drug of Computer Science since My Childhood When I Got my first core 2 duo Pc.