11 Methods To Fix When Mechanical Keyboards Double Typing?

  • Post category:Mechanical
  • Post author:
  • Reading time:21 mins read

When you’re working on a project and you start facing problems with Mechanical keyboards double typing, you might be wondering what to do. This article will teach you how to fix the issue and get back to productive work.

If you’re one of the many people who’ve been noticing that your keyboard is constantly doubling up the typing you do, then Don’t worry, we’ll walk you through a few simple steps that will help to fix your keyboard and prevent it from doubling up on your typing again.

Quick answer!

Mechanical keyboards may sometimes suffer from a problem called “double typing,” where a single keypress registers as two keystrokes. Some methods to fix this issue include adjusting the debounce time, cleaning the keyboard, updating Software or drivers, and replacing the switch or the keyboard.

In this Article we sahre with you more solutions too, If the problem persists after trying these methods, it may indicate a hardware defect, and the keyboard may need to be repaired or replaced.

But before we go ahead, first of all, see what is double clicking and where are the major reasons of this problem.

What are double clicking and repeating keys?

Double typing is a problem that can occur with mechanical keyboards. The keys can press Multiple time for each keystroke When you are typing or playing games, which can make it difficult to type or to do work.

There are a few things you can do to fix this problem. Here we will see them and also share solutions for them too.  

What are the Common Causes of Double Typing Problems on mechanical keyboards?

There are a few common causes of double typing problems on mechanical keyboards. The most common culprit is dust or dirt lodging between the keycap and the switch. This can cause the key to register more than once when you press it, leading to typos.

Another cause is sticky keys, which can be caused by spilled coffee or other liquids, excessive sweating, or even food residue left on the keyboard.

And also, faulty switches can also cause double typing. If one of your keys is sticking and won’t respond properly when you press it, that key may be registering multiple times as you type.

In all cases, fixing the problem usually involves cleaning the keyboard and replacing any defective parts.

How To Fix When Mechanical Keyboards Double Typing

Let’s Solve this issue. And take a look at Possible solution for that.

How To Fix When Mechanical Keyboards Double Typing

1. Clean Your Keyboard

The first thing you should do is remove any dust or debris that may be hiding the key switch. This includes any dirt, hair, or other material that may have collected over time.

Once everything is clean and free from obstruction, use a Q-tip to apply some light Lube to each key switch. Make sure to apply enough Lube so that it covers the entire switch but doesn’t get messy.

After applying the Lube, place your fingers over each key switch and press down firmly for about 10 seconds. This will activate the oil and help it to lubricate the key switches properly.

Why are Mechanical Keyboards better for typing?

2. Check Keyboard Cable

If you are still experiencing double typing, it may be necessary to check the keyboard cable. This is especially common if you are using the keyboard for a long time.

Check to see if there is any debris or dust buildup on the cable Near the USB itself. If so, remove any debris with a cotton swab and Again connect Keyboard to the computer. Hope its starts Working Again.

3. Windows Troubleshooting

If you are experiencing double typing on a Windows computer, it might be necessary to use windows troubleshoot which can fix the major issues automatically.

Don’t forget to check to see if there is any software or hardware that is preventing the keyboard from working properly. This includes any anti-virus software, firewall rules, or other programs that may be interfering with the keyboard.

Next, try troubleshooting the keyboard using windows troubleshooter.

To Troubleshoot keyboard in windows 11:

  • Open Windows Setting By Pressing Windows+i.
  • Click on First option system.
  • Here you will see different option click on troubleshoot.
  • Then click on Other troubleshooters.
  • Select the keyboard. And it will automatically troubleshoot the issue.
  • If you will see “No changes or Updates were necessary” then its already fix.         
keyboard troubleshooter in windows 11

4. Update Registry For Keyboard Response

If you are unable to resolve the double typing issue using the steps above, it may be necessary to update the registry. This is a last resort and should only be used if all other methods have failed.

To update the registry,

Press Widnows+R. This will open run Box.

Type “regedit” in run box and hit Enter.

Now you will see Regestery is Open.

Now go to the following path by clicking left side Menu.

HKEY_CURRENT_USER\Control Panel\Accessibility\Keyboard Response

Double click on AutoRepeatDelay.

Set the Value to 500. And Press Ok.

Regestery keyboard autorepeat delay

Now Double click on AutoRepeadRate.

Set the Value to 50.

keyboard autoRepeatRate

Finally Double click on DounceTime.

And set its value to 50.

Bounce time in keyboard setting

After setting these value, make sure that you restart the computer.

5. Restart your PC

If you are still experiencing issues after trying the steps above, it may be necessary to restart your PC. This will clear any temporary files or programs that might be causing the problem.

Restart Pc

6. Change the Repeat Rate of Keyboard

You can change repeat rate of your keyboard by above Regestery setting. But here I am sharing an alternative Method to change the repeat rate of your keyboard. And it will fix the Double tying issue.

To change Repeat Rate of the Keyboard,

  • Search Control Panel in windows search.
  • Select the control panel and open it.
  • Click on the view large icon on right side button.
control panel large icon
  • Select keyboard.
  • Here you will see two options, Repeat delay and Repeat Rate.
  • Adjust repeat Delay from Short to long.
  • Adjust Repeat rate from fast to slow.
keyboard setting in control panel
  • And then click on ok.

7. Using Keyboard Chattering Fix

To try and fix keyboard chattering, you can disable some of the faster typing features. This will allow the keyboard to focus on individual keystrokes instead of trying to figure out multiple ones at once.

To Solve the issue:

  • Download the Chattering fix software:
  • After downloading Unzip the file into a Folder.
  • Double-click on setup and Install.
  • After installing Open Chattering Fix.
  • Click on the Confit button on the left top side.
  • Here you will see a Box for Threshold.
  • Type the 500 ms in This box.
Keyboard Chattering Fix
  • This will actually fix your keyboard keys for a Holding time of  500 milliseconds, Then Register a New key.

8. Keep Pressing The Key

If the issue is simply due to debris or dirt accumulation on the key switches, then the Best Method step is to simply keep pressing the keys until they are clean.

This can be done by using a soft cloth and some gentle soap, or a vacuum cleaner with a dustbin. Be sure to remove all of the debris before re-seating the keyboard in your device.

9. Update Keyboard Driver

If the keyboard is not registering properly due to a software issue, then it may be necessary to update the driver for your device. This can be done by visiting the manufacturer’s website or by downloading a new driver from a third-party source.

To update keyboard Driver,

  • Right click on start button and click on Device manager.
Device manager in windows 11
  • This will open all the Device connected to your pc.
  • Click your keyboard, right click on it and click update Driver.
update keyboard driver
  • Click on Search automatically For Drivers.
  • And it will update the driver.

10. Change Your Switches

If the key switches are not registering properly, then it may be necessary to replace them. This can be done by taking off the front cover of your keyboard and accessing the key switches inside.

Once you have located them, you can either purchase new switches or do DIY repairs by replacing the mechanical parts with a new set of components.

11. Replace keyboard

If the keyboard still does not work properly, it may be necessary to replace it. This is a more expensive option, but it may be the only solution if debris or dirt is causing the issues.


If you’ve been experiencing problems with your mechanical keyboard doubling up the typing Keys, then you can follow these steps to fix.

First of all, check that your keyboard’s keys are not dusty. Another reason that can be your keyboard’s cable not properly working. Make sure that cable is inserted properly in your CPU.

It can also cause by software or driver issue. So don’t forget to update or reinstall keyboard driver. And check your windows setting for keyboards too.

Hope Now you find the solution for Mechanical keyboard double typing. Don’t forget to share it.


What is the cause of a mechanical keyboard doubling up on typing?

There are a few potential causes for a keyboard to double up as you type. The most common culprit is dust or debris getting stuck in the actuation switch, which can cause the keyboard to register multiple keystrokes.

If your keyboard has a rubber dome over the actuation switch, it can also become saturated with liquid and expand, causing the same problem.

In rare cases, faulty wiring or components within the keyboard itself can cause it to malfunction in this way.

How do I clear out any debris or dust that may be causing my keyboard to double up on typing?

The best way to clear out any debris or dust is to use an electric vacuum cleaner with a crevice tool attachment.

You can also try using a hairdryer set on low heat to blow the dust off of your keyboard. If these methods fail, you may have to take your keyboard into an electronics repair shop for cleaning and/or repair.

How do I know if my keyboard is actually defective?

If you’re experiencing issues with your keyboard doubling up on typing, it’s best to take it into an electronics repair shop for a diagnosis.

Your keyboard may have a problem with the actuation switch, faulty wiring or components within the keyboard itself. If this is the case, the shop may be able to fix the issue without having to replace the entire keyboard.

How do I clean the switches on my mechanical keyboard?

To clean the switches on a mechanical keyboard, you can use compressed air, a keycap puller, and a cleaning solution.

Remove the keycaps using the keycap puller. Then, spray compressed air onto the switch to remove any dust or debris. Finally, use a cleaning solution and a cotton swab to gently clean the switch.

Can I replace the switches or keycaps on my mechanical keyboard?

Yes, switches and keycaps can be replaced on most mechanical keyboards. However, the process of replacing switches can be complicated and may require special tools. Keycaps are easier to replace and can be purchased separately.